[egenix-users]

[Matthias Pronk]

Hi!
I'm trying to compile the experimental package on Mac OS X 10.4 (Tiger).
But the compiler (both gcc 3.3 and 4.0) exit with an error:

------

Turing:~/Desktop/egenix-mx-experimental-0.9.0 mp$ python setup.py  
install
running install
running build
running build_clib
creating build
creating build/temp.darwin-8.2.0-Power_Macintosh-2.4

[snip output with lots of errors and warnings]

mx/Number/mxNumber/mxNumber.c: At top level:
mx/Number/mxNumber/mxNumber.c:4234: warning:  
`mxNumber_BinaryIntegerOperation' defined but not used
mx/Number/mxNumber/mxNumber.c:174: warning: `insint' defined but not  
used
mx/Number/mxNumber/mxNumber.c:363: warning: `_mxInteger_FromInteger'  
defined but not used
mx/Number/mxNumber/mxNumber.c:376: warning: `_mxInteger_FromFloat'  
defined but not used
mx/Number/mxNumber/mxNumber.c:389: warning: `_mxInteger_FromRational'  
defined but not used
mx/Number/mxNumber/mxNumber.c:1088: warning:  
`mxInteger_notimplemented1' defined but not used
mx/Number/mxNumber/mxNumber.c:1097: warning:  
`mxInteger_notimplemented2' defined but not used
mx/Number/mxNumber/mxNumber.c:1106: warning:  
`mxInteger_notimplemented3' defined but not used
mx/Number/mxNumber/mxNumber.c:1753: warning:  
`_mxRational_FromRational' defined but not used
mx/Number/mxNumber/mxNumber.c:1952: warning: `_mxRational_FromFloat'  
defined but not used
mx/Number/mxNumber/mxNumber.c:2985: warning:  
`mxRational_notimplemented2' defined but not used
mx/Number/mxNumber/mxNumber.c:2994: warning:  
`mxRational_notimplemented3' defined but not used
mx/Number/mxNumber/mxNumber.c:3189: warning: `mxFloat_FromMPZ'  
defined but not used
mx/Number/mxNumber/mxNumber.c:3202: warning: `mxFloat_FromMPQ'  
defined but not used
mx/Number/mxNumber/mxNumber.c:3241: warning: `_mxFloat_FromInteger'  
defined but not used
mx/Number/mxNumber/mxNumber.c:3254: warning: `_mxFloat_FromFloat'  
defined but not used
mx/Number/mxNumber/mxNumber.c:3995: warning:  
`mxFloat_notimplemented2' defined but not used
mx/Number/mxNumber/mxNumber.c:4004: warning:  
`mxFloat_notimplemented3' defined but not used
error: command 'gcc' failed with exit status 1

------

I have Python 2.4.1 and I've tried gcc 3.3 and 4.0.
None of these work.

The eGenix base package installed flawlessly.

Any help is appreciated!

Thanks in advance,
- Matthias